Call us directly 0409 082 026

Floors that cope with workshop grit in O’Connor

Laminate floor in an O’Connor front office

O’Connor is mostly light industrial and commercial, and many businesses here have a front office or showroom attached to a workshop or warehouse. Grit and dust tracked in from the work floor wear flooring quickly. Floor sanding in O’Connor and hard-wearing installs keep these spaces looking presentable.

Laminate is often the most practical choice for front offices next to a workshop – it resists scratches, is quick to install and is easy to keep clean. Where a business already has timber floors, a recoat restores the protective layer before grit wears into the timber.

O’Connor also has a residential pocket, and we sand and polish timber floors in homes here and in the neighbouring Fremantle suburbs.

Need a tougher floor for your O’Connor office or showroom? Call 0409 082 026 or email bettafloorsanding@gmail.com.

O’Connor floor services

Installs, recoats and sanding for businesses and homes.

Restoration sanding

Brings tired, grey or stained boards back to clean, even timber.

About sanding

Edge and corner sanding

Every board sanded right up to the skirting, so the colour stays even to the wall.

Edge sanding

Screen and recoat

For sound floors that just look tired – quicker and cheaper than a full sand.

Recoat option

Polish and seal

Hard-wearing coatings in the sheen level you choose, from matt to gloss.

Finishes

Floor trims

Splay beading and trims for a tidy edge between floor and wall.

Trims

New skirting

Replaces chipped or missing skirting so walls and floor meet cleanly.

Skirting boards

Floating floors

Laminate floors installed over most existing hard surfaces.

Laminate

Engineered timber

Real timber surface on a stable core, pre-finished at the factory.

Engineered floors

How we handle O’Connor floor jobs

We match the flooring to how the space is used.

  1. Assess the floor

    Is it a recoat or a full sand? We check the wear and tell you honestly.

  2. Main sanding

    The floor sander removes old coatings and levels the boards in progressively finer passes.

  3. Edge sanding

    Floor edging reaches right up to skirting boards, corners and doorways.

  4. Fill and fine sand

    Gaps and nail holes are filled, then a final fine sand leaves the surface ready to coat.

  5. Finish coats

    The chosen finish goes on in coats, with drying time between each one.

Flooring for O’Connor businesses

O’Connor, in the City of Fremantle, sits just east of Fremantle and is home to a busy light industrial and commercial area, with residential streets nearby.

  • Laminate installs for offices beside workshops
  • Recoats to protect existing timber floors
  • Matting advice to reduce tracked-in grit
  • Sanding and polishing for nearby homes
  • Free quotes

A hard-wearing floor and good entry mats make a big difference in spaces that share a door with a workshop.

Recoated showroom floor, O’Connor Hard-wearing office floor install, O’Connor Sanded timber floor in an O’Connor home

Floor sanding O’Connor – common questions

What flooring suits an office next to a workshop?

Laminate is hard-wearing, scratch-resistant and easy to clean, which makes it a practical choice.

Can timber floors in a showroom be protected?

Yes. Regular recoats and good entry mats help stop grit wearing into the timber.

Do you also work in homes in O’Connor?

Yes. We sand and polish floors in homes in O’Connor and nearby suburbs.

How long does a laminate install take?

Most office spaces can be installed in a day or two, depending on size.

How do I book a quote in O’Connor?

Call 0409 082 026 or send the quote form with details of your space.

O’Connor and nearby suburbs

We work across O’Connor and in these neighbouring suburbs.

See all areas we serve

Get the right floor for your O’Connor premises

Free quotes for installs, recoats and sanding.

0409 082 026

Free quote

Tell us about your floor and we’ll send a free price.

Call now