Call us directly 0409 082 026

Floorboard gaps and sanding in Bibra Lake

Gaps filled before polishing in Bibra Lake

A question we hear often in Bibra Lake is about gaps between floorboards. Timber is a natural material that absorbs and releases moisture, so boards shrink a little in dry summer months and swell in winter. Small seasonal gaps are normal. Floor sanding in Bibra Lake is a good time to decide how to handle them.

Fine gaps can be filled during sanding, but filler in a floor that moves a lot can crack and fall out over time. For floors with larger or very seasonal gaps, we may recommend leaving some gaps unfilled or using a flexible approach. We’ll look at your floor and explain what will last.

Once the gaps are dealt with, we sand, edge and polish the floor to a smooth, even finish that suits your home.

Worried about gaps in your Bibra Lake floor? Call 0409 082 026 for advice, or email bettafloorsanding@gmail.com.

Bibra Lake floor services

Sanding, gap filling and polishing, with honest advice.

Full sand back

Old polyurethane, grey patches and pet marks removed in progressively finer passes.

How sanding works

Edge and corner sanding

Every board sanded right up to the skirting, so the colour stays even to the wall.

Edge sanding

Maintenance recoats

Worn but sound finish? A recoat restores the sheen without a full sand.

Recoating

Finish and sheen

Matt, satin or gloss – chosen to suit the room and how it’s used.

Polishing

Floor trims

Splay beading and trims for a tidy edge between floor and wall.

Trims

Skirting and quarter round

New skirting or quarter rounds to cover gaps and finish the room.

Skirting

Laminate installation

A budget-friendly floating floor for rooms that take heavy traffic.

Laminate

Pre-finished floors

Engineered boards that are ready to walk on as soon as they’re down.

Engineered timber

How we sand Bibra Lake floors

We check gaps and movement first, then sand and coat.

  1. Inspect and prepare

    We check the timber, punch down raised nails and plan the order of rooms with you.

  2. Prepare the boards

    Nails are punched, loose boards secured and the room made ready.

  3. Level the floor

    The main sander removes old coatings and evens out cupped or worn boards.

  4. Fill and fine sand

    Gaps and nail holes are filled, then a final fine sand leaves the surface ready to coat.

  5. Coats and cure

    Finish coats go on with drying time between each, then the floor cures.

Floor sanding in Bibra Lake

Bibra Lake, in the City of Cockburn, surrounds the lake and wetlands of the same name and is home to Adventure World and a sizeable light industrial area. Its residential streets have a mix of established and newer homes.

  • Honest advice on seasonal gaps
  • Fine gaps filled during sanding
  • Larger gaps assessed before filling
  • Even, smooth finishes
  • Free quotes

Understanding how timber moves helps you get a finish that lasts and avoid filler cracking out later.

Sanded timber floor in a Bibra Lake home Polished floorboards, Bibra Lake Smooth refinished floor in Bibra Lake

Floor sanding Bibra Lake – common questions

Are gaps between floorboards normal?

Small seasonal gaps are normal. Timber shrinks in dry weather and swells in humid weather.

Should all gaps be filled?

Fine gaps can be filled, but filler in floors with a lot of movement can crack out. We’ll advise on your floor.

Why do gaps get bigger in summer?

Dry summer air causes timber to lose moisture and shrink slightly.

Can large gaps be fixed?

Very large gaps may need boards re-laid or slivers of timber fitted. We’ll explain the options when we quote.

How do I book a quote in Bibra Lake?

Call 0409 082 026 or send the quote form and mention any gaps you’ve noticed.

Bibra Lake and nearby suburbs

We work across Bibra Lake and in these neighbouring suburbs.

See all areas we serve

Sand and polish your Bibra Lake floors

Free quotes with gap advice.

0409 082 026

Free quote

Tell us about your floor and we’ll send a free price.

Call now