Floor Sanding Coogee

Looking after wide-board floors in Coogee

Wide engineered boards recoated in Coogee

Many of the newer homes around Port Coogee have wide engineered timber boards – a popular look in coastal homes. Wide boards show wear and scratches more clearly than narrow ones, because there are fewer joins to break up the surface. Floor sanding in Coogee often starts with knowing when these floors need their first recoat.

A recoat before the finish wears through keeps wide engineered boards protected and avoids the need for sanding, which isn’t always possible on thinner timber layers. We buff the existing finish, clean thoroughly and apply a fresh protective coat.

Coogee’s older homes, closer to the original beach streets, often have solid timber floors. These can be fully sanded and polished back to fresh timber, with gaps filled and edges finished neatly.

Have wide-board floors in your Coogee home? Call 0409 082 026 to check if it’s time for a recoat, or email bettafloorsanding@gmail.com.

Coogee floor services

Recoats for newer floors and full sanding for solid timber.

Floor sanding

Back to bare timber to remove scratches, stains and worn coatings.

Floor sanding Perth

Perimeter edging

Gets into corners, alcoves and along walls for a finish that matches the open floor.

Edging work

Recoating

A light buff and fresh coat for floors that are dull but not damaged.

About recoating

Finish and sheen

Matt, satin or gloss – chosen to suit the room and how it’s used.

Polishing

Beading and trims

Covers the expansion gap and gives the floor a neat, finished edge.

Splay beading

New skirting

Replaces chipped or missing skirting so walls and floor meet cleanly.

Skirting boards

Laminate floors

Hard-wearing laminate flooring supplied and installed.

Laminate flooring

Engineered boards

Timber look and feel with a stable core, finished before it arrives.

Engineered timber

How we look after Coogee floors

We check your floor type and wear first, then recoat or sand.

Inspect and prepare
We check the timber, punch down raised nails and plan the order of rooms with you.
Main sanding
The floor sander removes old coatings and levels the boards in progressively finer passes.
Level the floor
The main sander removes old coatings and evens out cupped or worn boards.
Finish the detail
Edges, corners and thresholds sanded, then the floor is filled and fine-sanded.
Finish coats
The chosen finish goes on in coats, with drying time between each one.

Floor care for coastal Coogee homes

Coogee, in the City of Cockburn, is known for Coogee Beach and the Port Coogee marina development, with newer waterfront homes alongside older streets near the coast.

Recoats timed before wide boards wear through
Full sanding for solid timber floors
Floor type checked before quoting
Finishes suited to coastal homes
Free quotes

Keeping a recoat schedule is the simplest way to protect an engineered floor for its full lifespan.