Call us directly 0409 082 026

Why moisture matters before laying timber in Bayswater

Timber floor installed after moisture check in Bayswater

Timber and moisture don’t mix well. A slab that hasn’t dried out, a raised floor with poor ventilation or rising damp in an older home can cause new boards to swell, cup or lift. In older parts of Bayswater, especially closer to the river, timber flooring in Bayswater should always start with a moisture check.

We test the subfloor before installing. If moisture levels are too high, the cause needs to be fixed first – that might mean improving under-floor ventilation, fixing a leak or using a moisture barrier on a slab. Once the subfloor is ready, we install engineered or solid timber with the right underlay and fixings.

Taking this step first protects your investment and avoids costly problems later.

Want your Bayswater subfloor checked before new timber goes down? Call 0409 082 026 or email bettafloorsanding@gmail.com.

Bayswater timber flooring options

Floors, stairs and trims, installed on a properly prepared base.

Pre-finished engineered timber

Real timber on a stable core, coated at the factory and ready soon after it’s laid.

Engineered vs solid

Solid timber

The long-life option: laid, sanded, coated and ready for decades of use.

Engineered or solid?

Timber floors & stairs

Treads and nosings finished to match the new floor, from entry to landing.

Timber stairs

On-site finishing

Solid timber is sanded smooth and coated in place after laying.

Finishing service

Laminate floors

A practical timber-look floor for busy rooms and investment properties.

Laminate

Finishing trims

Beading and skirting that cover expansion gaps and tidy the edges.

Splay beading

Engineered or solid in an older home?

Both need a dry subfloor; engineered boards are generally more stable if conditions vary.

Pre-finished engineeredSolid timber
ConstructionReal timber top layer on a stable coreOne piece of timber all the way through
How it’s finishedArrives ready-coatedFinished in place, sheen chosen on site
Time to useOften soon after installationAfter the final coat has cured
Good fit forQuick upgrades and slab floors*Long-term owners after a seamless floor
RefinishingRecoat, or light sand if the layer allowsFull sand and polish when needed

*Check strata by-laws and the condition of existing tiles before choosing a floor – we’ll assess this when we quote.

Timber stairs in Bayswater homes

Where homes have internal stairs, timber treads matched to the new floor give a consistent finish between levels.

  • Treads finished in the same colour as your boards
  • Rounded nosings for a clean, safe edge
  • Floors and stairs done together, one booking

Already have timber floors in Bayswater? See floor sanding Bayswater to restore them.

Timber stairs in a Bayswater home

How we install timber in Bayswater

Every job starts with a moisture check.

  1. Site visit and price

    Rooms are measured, options discussed and a clear quote provided.

  2. Subfloor assessment

    We make sure the base is flat, dry and sound enough for timber.

  3. Acclimatise the boards

    Timber settles to your home’s conditions so it moves less later.

  4. Install the floor

    Boards are laid with the right underlay or fixing, with expansion gaps at the walls.

  5. Finish and trim

    Solid floors are sanded and coated; skirting, beading and nosings fitted.

Timber flooring in Bayswater

Bayswater, in the City of Bayswater, stretches from the redeveloped station precinct to Riverside Gardens on the Swan River, with early cottages and post-war homes among newer builds.

  • Moisture testing before every install
  • Advice on ventilation and moisture barriers
  • Stable engineered options
  • Solid timber for suitable subfloors
  • Free quotes

A dry, sound subfloor is the foundation of a timber floor that stays flat for years.

Engineered timber in an older Bayswater home Subfloor preparation in Bayswater New timber flooring near the river, Bayswater

Timber flooring Bayswater – common questions

Why does subfloor moisture matter?

Excess moisture can make timber swell, cup or lift after installation.

How do you check for moisture?

We test the slab or subfloor before installing and explain the results.

What if the moisture is too high?

The cause needs fixing first – for example ventilation, a leak or a moisture barrier.

Is engineered timber more stable?

Generally, yes. Its layered construction moves less with changes in humidity.

How do I book a quote in Bayswater?

Call 0409 082 026 or send the quote form with the age of your home.

Timber flooring in Bayswater and nearby

We install timber floors across Bayswater and these nearby suburbs.

See all timber flooring areas

Timber floors on a solid base in Bayswater

Free quotes with moisture checks.

0409 082 026

Free quote

Tell us about your floor and we’ll send a free price.

Call now